Contact us
Leave Your Message
News Categories
Featured News

Wholesale Cordless Vacuum Cleaners: Motor, Battery and the Five Quotes You Should Compare

2026-10-31

Two cordless vacuum quotations that both read as a 100 W stick vacuum can describe completely different products. The motor alone can move the suction from 6.5 kPa to 14 kPa, and the battery pack decides what happens to your shipping paperwork. Five checks make five quotes comparable.

By Wanchen Xuan, Foreign Trade Specialist · Published 31 October 2026 · 11 min read · Last verified: 2026-10-31

TL;DR

  • Ask which motor is fitted, not what power it is. On our JL-S1012, the same 100 W rating delivers 6.5 kPa with the brushed motor and 14 kPa at high level with the brushless one.
  • Battery chemistry is a compliance question, not just a runtime question. Our published range spans nickel metal hydride at 1800 mAh, lithium at 2200 mAh at DC 14.4 V and lithium at 2200 mAh at DC 18.5 V, and those three packs do not share a regulatory path.
  • Runtime is a test result, so the test condition is what makes it comparable. Published runtimes across our range run from 15 to 30 minutes, and that is not the same number at every suction setting.
  • Container loading quantity is a landed-cost input fixed at design stage, running from 1152 pieces per 20 ft container on the JL-S1012 to 540 on the JL-S1006.
  • Certifications differ by destination, with GS, CE, UL, CCC, RoHS and WEEE published for our products and the battery separately governed by the EU batteries regulation and shipping rules.

Quote One: The Motor, Which Is Where the Price Difference Hides

A cordless vacuum quotation states a wattage, and the wattage is the least informative number on the sheet.

Our published position on the JL-S1012 is that it is outfitted with flexible factory engineering configurations, offering a standard reliable brush motor or an advanced high-potency brushless motor for option. The stated reason is that the choice allows clients to align the hardware precisely with their specific target market cost and performance requirements.

Table 1 — Published specification for the JL-S1012, showing the two motor configurations on one model number.
Parameter Published value
Model number JL-S1012
Rated power 100 W
Rated voltage DC 14.4 V
Vacuum, brush motor 6.5 kPa or more
Vacuum, brushless motor Low level 6.5 kPa, high level 14 kPa
Noise 73 dBA or less
Battery capacity 2200 mAh
Dust cup capacity 300 ml
Working time 30 min
Charging time 3 hours
Product dimension 230 × 122 × 1104 mm
Carton dimension 568 × 475 × 370 mm (4 in 1)
Container loading 1152 pcs 20 ft / 2304 pcs 40 ft / 2688 pcs 40 ft HQ
Net and gross weight 2.0 kg / 2.9 kg

Source: Jinlong published product specification for the JL-S1012 smart cordless stick vacuum.

Because the brushless configuration more than doubles the high-level suction on the same model number and the same rated power, a quotation that omits the motor type cannot be compared against one that includes it, and the gap between them is not a rounding difference.

Why the buyer is the one who should choose

There is a legitimate reason for the brushed motor to exist in this product. A brushed motor is materially cheaper, and at the entry end of the retail market the motor is a large part of the bill of materials. Our own published framing is that the choice lets a client align the hardware with their target market cost and performance requirements, and that is a real commercial decision rather than an engineering compromise.

What else travels with the motor

Quote Two: The Battery, Quote Three: The Runtime

The battery pack is the second variable and the one with the widest consequences, because it changes the compliance file as well as the runtime.

Quote Two: chemistry, voltage and capacity

Our published cordless range spans three genuinely different battery configurations, and they are not variants of one pack. The JL-S1002 uses a nickel metal hydride pack at 1800 mAh with a rated voltage of DC 12 V / DC 14.4 V at 800–1000 W, with a 15-minute runtime. The JL-S1012 carries 2200 mAh at DC 14.4 V at 100 W with a 30-minute runtime. The JL-S1006 uses a lithium pack at 2200 mAh and DC 18.5 V at 110 W with a 20-minute runtime.

Because the same milliamp-hour figure on a nickel metal hydride pack and on a lithium pack does not represent the same energy, the chemistry has to be on the quotation and cannot be inferred from the capacity alone.

The compliance consequence is real. Lithium cells in a cordless appliance are governed separately from the appliance itself, both for transport and for market entry. For Europe the EU Batteries Regulation and the existing RoHS Directive both apply to the pack, and the transport classification is set under the dangerous goods rules that carriers work to. A supplier quoting a lithium pack without naming the shipping documentation is quoting a pack that may not clear the freight forwarder.

Quote Three: runtime is a test result

Published runtimes across our range run from 15 minutes on the JL-S1002 to 30 minutes on the JL-S1012 and the JL-S1020, with charging times of 4 hours, 3 hours, 4 hours and 4 to 5 hours respectively. A 15-minute figure and a 30-minute figure are not directly comparable, and the reason is the suction setting.

The airflow figures make the point. The JL-S1020 is published at 65 W with airflow of 18.5 L/S or more, vacuum of 6 kPa or more, noise 78 dBA or less, a 0.6 L dust cup and a 30-minute runtime. The JL-S1012 offers two suction levels on the brushless configuration, which is exactly the kind of feature that makes a single runtime number incomplete.

Because a runtime published at maximum suction and a runtime published at minimum suction describe different products, the test condition is what belongs next to the number rather than the number alone.

Quote Four: Certification, Quote Five: The Container

The last two checks are the ones that sit outside the product, and they are the ones that decide the landed cost and the market access.

Quote Four: what the certificate set has to cover

The battery is a separate question from the appliance, and that is the point. Because a cordless vacuum carries a lithium battery in most configurations, and because the battery is regulated separately for both transport and market entry, a quotation that lists the appliance certificates and says nothing about the pack is incomplete in a way that surfaces at the freight booking rather than at the factory.

Quote Five: container loading, which is the landed-cost line

Our published loading quantities are the clearest illustration of why two comparable-looking products can carry very different freight cost per unit.

  • JL-S1012 — 1152 pieces per 20 ft container, 2304 per 40 ft, 2688 per 40 ft HQ, at 2.0 kg net and 2.9 kg gross, with a 568 × 475 × 370 mm carton.
  • JL-S1020 — 1280 per 20 ft, 2600 per 40 .ft, 2950 per 40 ft HQ, at 1.9 kg net and 2.7 kg gross, with a 770 × 150 × 200 mm carton.
  • JL-S1002 — 1000 per 20 ft, 2100 per 40 ft, 2500 per 40 ft HQ, at 5.8 kg net and 6.8 kg gross, with a 630 × 440 × 195 mm carton for two units.
  • JL-S1006 — 540 per 20 ft, 1090 per 40 ft, 1270 per 40 ft HQ, at 6.0 kg net and 7.0 kg gross, with a 760 × 310 × 460 mm carton for two units.

What the manufacturer actually brings to this

The structural reason a factory like ours can answer these questions is that the tooling and the assembly are in the same building. We operate 129 injection molding machines ranging from 15 to 1600 tons, a dedicated 5,000 m² precision workshop with CNC machining centres, three-axis CMMs and EDM equipment, a tool-room capacity of 1,000 sets of molds per year, and 18 automated assembly lines with an annual capacity of four million units.

Because the mould, the injection moulding and the final assembly sit under one roof, a change to the motor or the battery is a tooling and line change rather than a second supplier negotiation, and that is what makes a mixed-motor programme like the JL-S1012 practical to run.

Frequently Asked Questions

How do I compare two cordless vacuum quotations that both quote the same wattage?

Start with the motor, because on the same model number the motor can be the largest single difference in the product. Our JL-S1012 is published at 100 W with either a standard reliable brush motor or an advanced high-potency brushless motor, and the vacuum figures are 6.5 kPa for the brushed option against 6.5 kPa low level and 14 kPa high level for the brushless one. Then normalise the battery chemistry and capacity, ask for the runtime test condition, confirm the certification scope for the destination including the battery documentation, and model the container loading quantity before comparing the unit prices.

Is a brushless motor worth the extra cost for a cordless vacuum?

It depends on what you are selling, and the published design intent is that the choice lets a client align the hardware with their target market cost and performance requirements. The brushless configuration more than doubles the high-level suction on the same model, and that matters for a customer comparing against a corded machine or for a floor-care claim in the listing. The brushed motor remains a legitimate position for an entry-price product, because a brushed motor is materially cheaper and the motor is a large part of the bill of materials at that end of the market.

What is the minimum order quantity for a private-label cordless vacuum?

That depends on the configuration and the tooling, and it is the number that changes the quotation most, so it should be settled before the motor option and the packaging are finalised. Our published annual capacity is four million units across 18 automated assembly lines, and our tool-room capacity is 1,000 sets of molds per year, so the constraint on a first order is usually the tooling rather than the assembly. Send the configuration and the volume and we will confirm the breakpoint against the actual program rather than quoting a generic figure.

Which certifications does a cordless vacuum need for the European market?

The appliance and the battery are governed separately. Our products are published against GS, CE, UL, CCC, RoHS and WEEE, and the battery pack additionally sits under the EU Batteries Regulation for market entry and under the dangerous goods rules for transport. Our own management systems are certified to ISO 9001, ISO 14001, ISO 45001 and IATF 16949, and the internal facility handles RoHS environmental measurement. Ask for the certificate set that names the specific model and the specific pack, because a general supplier certificate does not travel with the goods.

How long should a cordless vacuum battery last in real use?

The published figure is a test result and the test condition is what makes it meaningful. Our range publishes 15 minutes on the JL-S1002, 20 minutes on the JL-S1006, and 30 minutes on the JL-S1012 and JL-S1020, with charging times of 4 hours, 4 hours, 3 hours and 4 to 5 hours respectively. Runtime at maximum suction and runtime at minimum suction are different numbers, so the setting has to be quoted alongside the figure, and the filtration architecture is what determines whether the published airflow holds up over time.

Can you supply a cordless vacuum with a brushless motor and a specific brand packaging?

Yes, that is the core of the business. We are published as an OEM and ODM partner for Black & Decker, Electrolux, SEB, Shark, Panasonic and Honeywell, and as a key supplier for Haier, Joyoung and Supor domestically, with 30-plus R&D staff and annual R&D investment above 1.5 million USD. The one-stop service runs from initial mold design and trial through mass injection moulding to final assembly, which is what keeps the motor option, the pack and the packaging in a single schedule.

Which Approach Should You Take?

Normalise the five variables before you compare the prices, and send the specification as the first line of the enquiry rather than the model name.

Because the motor, the pack, the runtime test condition, the certificate scope and the container loading are all fixed before the first unit is made, they are the only five variables that can be compared, and getting them onto the table early is what turns five quotations into one comparison.

Jinlong JL-S1012 white cordless stick vacuum with transparent dust cup, orange button on the motor housing, detachable aluminium wand and floor head, shown with brush and crevice accessories
The JL-S1012 in white: a 2.0 kg net weight with a 300 ml transparent dust cup, a detachable wand and floor head, and an orange button on the motor housing. The motor housing is the part that changes between the brushed and brushless configurations, and it is also the part a buyer should look at first on a sample.

Our stick vacuum lineup covers smart cordless stick and handheld units, wireless units with a charger station, ergonomic cordless units with a charger station, smart mite cleaners with dual-zone suction, and the corded and wet-and-dry families alongside. The JL-S1012 is the example this article is built on, and we would rather walk you through it than describe it abstractly.

The company behind it operates a 68,000 m² facility in Yuyao with USD 16 million in fixed assets, a 5,000 m² precision mould workshop, 129 injection moulding machines from 15 to 1600 tons, 18 automated assembly lines and four million units of annual capacity, with a tool-room capacity of 1,000 sets of moulds per year. Because the mould and the line are in the same building, a motor or pack change is a line change rather than a second supplier, which is what makes a mixed-motor programme with a single certification schedule possible at all.

Talk to Our Export Team

To have a specification written against your target market and retail band, contact us at yyjlong@chinajinlong.com or on +86-574-62761998, with the factory at No.188, Tanjialing East Road, Yuyao, Zhejiang, China. Send the target market and retail price band, the battery preference and any transport constraints, the required certifications, the expected annual volume, the packaging direction and the delivery schedule, and you will get a motor and battery recommendation, the certificate list that applies, the container loading calculation and a quotation — all in one package rather than across several rounds.

About the Author

Wanchen Xuan

Wanchen Xuan is a Foreign Trade Specialist at Ningbo Jinlong Electric Appliance Co., Ltd., running turnkey vacuum cleaner and mold programs for European and North American brands from the Yuyao campus. She works on matching cordless vacuum platforms to real market requirements rather than to catalogue assumptions, and on building the qualification packages a European procurement lead needs before a program moves.

Website: chinajinlong.com | LinkedIn: Wanchen Xuan